machines

RAPIER 1500

Description:

GRINDING HEAD UNIT
The grinding head is solid and compact and has a 2 poles motor, an electronic wheel down-feed, a ceramic cup wheel and can be tilted.
The electric & electronic equipment is built in accordance to European safety Norms and it differs according to the options requested.
A particular technique in the preparation of the surfaces, and the use of paints having a high chemical and mechanical resistance, allow the machine to be highly resistant to the corrosive effects of the coolant over time.
The machine is supplied with set of keys, 1 lt of coolant oil, instruction and spare parts manual and book for the choice of the most suitable grinding wheel.
MAGNETICK CHUCK
This chuck is a low-voltage magnetic surface which is operated by a switch that allows the user to magnetise and demagnetise steel knives for single grinding. With this magnetic hold, the machine’s grinding capacity is triple that of the conventional type, depending on the width of the work piece. The uniform gripping action provided by the magnetism also ensures perfect cutting edge linearity and, what’s more, loading and unloading the pieces is

AUTOMATISM AND PROGRAMMING
Grinding wheel down-feed and spark out cycle can be programmed on this model. Over the grinding head, the machine has a vernier by means of which the total material to be removed can be programmed: once this amount has been removed, the grinding wheel down-feed stops and the spark out working cycle begins. Digital programmer main functions: grinding wheel motor start, water pump and magnetic cleaner start, carriage travel start, magnetic chuck on. It can also set following parameters: grinding wheel partial down-feed, spark-out time, carriage speed, grinding wheel down-feed at right side or right/left sides, and grinding wheel down-feed delay time. Once the machine has completed every working cycles, it stops automatically.
Grinding wheel motor 3 KW (5 HP)    
Reference manual bar to align knives on the edges
Rotating cutting edge reference
Segments grinding wheel  
Knives extension resting blocks from the back
Grid for paper filter
Sliding guides plastic protection  
Magnetic cleaner with rotating discs
Automatic paper filter
Manual paper filter
Magnetic chuck for hard metal inserts 20x70x200  
Magnetic chuck for hard metal inserts 20x70x400    
Magnetic chuck for hard metal inserts 20x70x600    
Category
Guillotines/Cutters
Manufacturer
RAPIER
Model
1500
Year
2021

Similar machines

 POLAR 115 EMC
POLAR 115 EMC
POLAR 137 EM MONITOR
POLAR 137 EM MONITOR
Polar 92 EMC
Polar 92 EMC
en_GBEN